HP UX Internet and Networking Software manual IP Addresses, Default Example

	NET.CFG Options Reference
	Protocol TCPIP Option
Syntax	Replace frame_type with the frame type used for your
(continued)	network connection. This value is the same as the frame
	value for the LINK DRIVER parameter.
	Replace network_name with a descriptive name
	for this network connection. The network name is
	used with the IP_ADDRESS, IP_ROUTER, and
	IP_NETMASK parameters to distinguish
	between the values for each network connection.
	If multiple LAN drivers are to be bound to,
	specify the BIND parameter multiple times, each
	on a different line in the NET.CFG file.
Default	1
Example	To bind TCP/IP to an NE2000 LAN driver for a single
	network board in your client workstation connected to the
	FINANCE-NET network, you would add the following
	lines to your NET.CFG file:
	protocol TCPIP
	bind ne2000 finance-net
	To bind TCP/IP to an NE2000 LAN driver for both
	the first and the second network boards in your client
	workstation, you would add the following lines to
	your NET.CFG file:
	Protocol TCPIP
	bind ne2000 1
	bind ne2000 2

IP Addresses

Use these parameters and values to specify your client workstation’s IP address, the subnetwork mask, and the default network router address, which are discussed on the following pages:

2-117