NET.CFG Options Reference
NetWare DOS Requester Option
Syntax | load conn table low=[on off] |
|
|
Default | off |
|
|
Modules | CONN.VLM |
|
|
Example | To increase conventional memory requirements required |
| by the NetWare Client software for supporting the initial |
| release of NetWare 4.0 utilities, you would place the |
| following lines in your NET.CFG file: |
| netware dos requester |
| load conn table low=on |
|
|
NOTE:Use the VLM /D command line parameter to determine how much conventional memory is used by this parameter setting.
LOAD LOW CONN=[on off]Specifies whether the connection manager is loaded in high or conventional memory.
By default, the connection manager, CONN.VLM, is loaded in conventional memory.
If the value for this parameter is set to “off,” CONN.VLM loads in upper memory, saving memory but sacrificing performance.
Syntax | load low conn=[on off] |
|
|
Default | on |
|
|
Modules | CONN.VLM |
|
|
Example | To load CONN.VLM in upper memory, thereby saving |
| memory but sacrificing performance, you would place the |
| following lines in your NET.CFG file: |
| netware dos requester |
| load low conn=off |
|
|