Weider ER-A220 instruction manual Before calling for service, Error code table

10Before calling for service

The malfunctions shown in the left-hand column below, labelled “Fault,” do not necessarily indicate functional faults of the machine. It is therefore advisable to refer to the “Checking” shown in the right-hand column before calling for service.

		Fault	Checking
(1)	The display won't be illuminated even when		• Is power supplied to the electrical outlet?
	the mode switch is turned to any other		• Is the power cord plug out or loosely connected to the
	position than “	”.	electrical outlet?
(2)	The display is illuminated, but the whole machine		• Is a cashier code assigned to the register?
	refuses registrations.		• Is the mode switch set properly at the “REG” position?
(3)	No receipt is issued.		• Is the paper roll properly installed?
			• Is there a paper jam?
			• Is the receipt function in the “OFF” status?
			• Is the print head release lever at the printing position?
(4)	No journal paper is taken up.		• Is the take-up spool installed on the bearing properly?
			• Is there a paper jam?
(5)	Printing is unusual.		• Is the print head release lever at the printing position?
			• Is the paper roll properly installed?

Error code table

When the following error codes are displayed, press the ckey and take a proper action according to the table below.

Error	Error status	Action
code
E01	Registration error	Make a correct key entry.
E02	Misoperation error	Make a correct key entry.
E03	Undefined code is entered.	Enter a correct code, or declare it by the programming.
E07	Memory is full (in the `key programming).	Program the `key within 25 steps.
E11	Compulsory depression of the Ñkey for direct	Press the Ñ key and continue the operation.
	finalization
E12	Compulsory tendering	Make a tendering operation.
E22	Overlapped cashier error
E23	Cashier resetting over error
E32	No entry of a cashier code	Make a cashier code entry.
E34	Overflow limitation error	Make a registration within a limit of entry.
E35	The open price entry is inhibited.	Make a preset price entry.
E36	The preset price entry is inhibited.	Make an open price entry.
E37	The direct finalization is inhibited.	Make a tendering operation.
E67	Subtotal void is not allowed.	Finalize the transaction, and correct the wrong entries in the
		void mode.

59