Weider ER-A220 instruction manual Removing the paper roll, When the take-up spool is used

When you want to manually install a new roll of paper while your machine is turned off, follow the steps shown below:

1.Pull the print head release lever toward you (to the head-up position). (Refer to the drawing on page 54.)

2.Correctly place the new paper roll into the paper bed.

3.Insert the paper end into the printer until it comes out of the printer.

4.Return the print head release lever to its original position.

Removing the paper roll

When a red dye appears on the paper roll, it is time to replace the existing paper roll. Replace the paper roll with new one. If you plan not to use your register for an extended period of time, remove the paper roll, and store it in the appropriate place.

Precaution: Be very careful for the manual cutter mounted on the printer cover when removing and replacing the cover, so as not to hurt yourself.

When the take-up spool is not used:

1. Remove the printer cover.

2. Cut the paper behind the printer and near the paper roll.

3. Press the ákey until the paper remaining in the printer comes out completely.

4. Remove the paper roll from the paper bed.

Do not pull the paper through the printer.

When the take-up spool is used:

1.Remove the printer cover.

2. Press the ákey to advance the journal paper until its printed part is out of the way.

3. Cut the paper and remove the take-up spool.

4. Cut the paper behind the printer and near the paper roll.

5. Press the ákey until the paper remaining in the printer comes out completely.

6. Remove the paper roll from the paper bed.

Do not pull the paper through the printer.

7. Remove the outer side of the take-up spool as shown on the left.

8. Remove the printed journal roll from the take-up spool.

56