Weider ER-A220 instruction manual Programming thermal printer density, RS-232C print data

(4) RS-232C start code and end code

To set “000000”

Ñ33 ≈ *ABCDEF Ñ É

*A-C: Start code 000-127 D-F: End code 000-127

(5) RS-232C time out setting

To set “0”

Ñ35≈ Time out (1 to 255 sec.) ÑÉ

(6)RS-232C print data

							To set “0” for all items
			Ñ	36		≈				Ñ	É
								*ABC
* Item:					Selection:						Entry:
	A	Sensing DR signal				Yes			0
						No			1
	B	Sensing CS signal				Yes			0
						No			1
	C	Sending all print data				Yes			1
						No			0
			Key operation example							Print

Ñ30 ≈

2 Ñ

É

Programming thermal printer density

To set “0”

Ñ50≈ *Printer density (00-99) ÑÉ

*“00” = 70% for standard density “50” = 100% for standard density “99” = 130% for standard density

Key operation example Print

Ñ50 ≈

00 Ñ

É

26