16
Programming function parameters for ;, ', î, rand pkeys
Footer printing
This programming decides whether or not your machine should print a message at the foot of a receipt
when a specified media key is used.
Amount tendered compulsory
You may select amount tendered compulsory or optional for the ;and 'keys.
You may select amount tendered compulsory or inhibited for the îkey.
Limit amount (HALO)
For the ', î, rand pkeys, program upper limit entry amount for the tendered amount. For the
;key, program upper limit entry for total cash amount which can be handled on your register. The
HALO limit is in effect for REG-mode operation but can be overridden in the MGR mode. The HALO
limit is represented by the number of allowable digits for the maximum entry or total amount. When “0”
is set, the operation of the corresponding key is prohibited.
*1:Item: Selection: Entry:
AFooter print* Yes 1
No 0
BAmount tendered entry* Compulsory 1
Non-compulsory for the ;or 'keys 0
Inhibit for the îkey 0
CLimit amount 0-8
* When programming for ror pkey, always enter 0.
How to program alphanumeric characters
Your register allows you to program the text for departments, PLUs, function and so on in the character entry
mode. If you enter a programming job that entails alphanumeric character input, the register automatically goes
into the character entry mode.
In the character entry mode, perform alphanumeric character input by referring to the alphanumeric character
code table and entering the character codes with the numeric keys.
Entering character codes
• Numerals, letters and symbols are programmable by entering character codes and the ºkey. See the
alphanumeric character code table on the next page.
• Double-size characters can be made by entering the character code 253.
• All three digits of the character code MUST be entered (even if it starts with zeros).
To program the word “SHARP” with the letter “S” being double size
253 º083 º072 º065 º082 º080 º
S H A R P
Text programming
7
From left, ABC
018 ≈
îÉ
PrintKey operation example
*1ABC or É
To program “0” for all items
To program for another key *2:Press Ñ key for ; key setting.
≈Ñ,',î,rp
*2