EXTERNAL VIEW
Front view
Operator display
Printer cover
Receipt paper
Drawer
Rear view
Customer display
Power cord
Mode switch
Drawer lock | Keyboard |
PRINTER
The printer is one station type thermal printer, and therefore it does not require any type of ink ribbon or cartridge. The average life of the printer is approximately 4 million lines.
When removing the printer cover, lift up its rear. When installing the printer cover, hook it on the pawls on the cabinet and shut it.
Paper bed
Caution: Be very careful with the cutter which is mounted on the cover, so as not to cut yourself.
Print head release lever
The print head can be lifted off the roller by the print head release lever (gray lever on the right side of the printer). Pulling the lever toward you move the print head away from the roller. If the paper becomes jammed, you will need to use this lever to release the print head from the paper so you can remove the jammed paper.
Your register is shipped with the print head release lever positioned at the lifted up position. Be sure to push down the lever toward the paper bed side (printing position) before you use the register.
Print head release lever
Do not attempt to remove the paper roll with the head in the down position. This may result in damage to the printer and print head.
4
