![](/images/new-backgrounds/1298641/29864195x1.webp)
Manual VAT
Ñ◊
This system provides the VAT calculation for taxable 1 through 4 subtotals. This calculation is performed using the corresponding programmed percentages when the ◊key is pressed just after the Ñkey.
Manual VAT 1 system (Manual entry method for subtotals that uses VAT 1 preset percentages)
To use a programmed rate
Ñ
VAT rate
◊
This system enables the VAT calculation for the then subtotal. This calculation is performed using the VAT 1 preset percentages when the ◊key is pressed just after the Ñkey. For this system, the
Manual tax
Ñ◊
This system provides the tax calculation for taxable 1 through 4 subtotals. This calculation is performed using the corresponding programmed percentages when the ◊key is pressed just after the Ñkey.
After this calculation, you must finalize the transaction.
Automatic VAT 1 and automatic tax 2-4 system
This system enables the calculation in the combination with automatic VAT 1 and automatic tax 2 through 4. The combination can be any of VAT1 corresponding to taxable 1 and any of tax 2 through 4 corresponding to taxable 2 through taxable 4 for each item. The tax amount is calculated automatically with the percentages previously programmed for these taxes.
• A PLU not programmed for any of the tax statuses is registered depending on the tax status of the department which the PLU belongs to.
•VAT/tax assignment symbol can be printed at the fixed right position near the amount on the receipt as follows:
VAT1/tax1 A
VAT2/tax2 B
VAT3/tax3 C
VAT4/tax4 D
When the multiple VAT/tax is assigned to a department or a PLU, a symbol of the lowest number assigned to VAT/tax rate will be printed. For details, contact your authorized SHARP dealer.
Key operation example |
|
550ù
Ñ
◊
É
(When the manual VAT
46