The pointer (8) doesn’t move when you move the mouse.
One of the following situations is probably the cause:
mYour system has a software problem.
Press
Restart your Macintosh. See “Start Over” in the section “If You Have Trouble” earlier in this chapter for instructions.
Check the startup disk and program you were using when the problem occurred. Make sure that all programs, desk accessories, and system extensions you’re using are compatible with the system software. Try starting up the computer from the Disk Tools disk or the
If the problem recurs, you may need to reinstall system software. See “Installing or Reinstalling System Software” later in this chapter for instructions.
mThe mouse is not connected properly.
Turn the computer off using the power button on the front of the computer, check that the mouse and keyboard cables are connected properly, and then restart the computer.
IMPORTANT Do not connect the mouse while the computer is turned on. You may damage your computer.
mSignals from the mouse are not reaching the computer, either because the mouse needs cleaning or because there is something wrong with the mouse.
Clean the mouse according to the instructions in Appendix A of this book.
If you have another mouse or pointing device, try connecting and using it. (Turn the computer off before connecting it.) If the new device works, there is probably something wrong with the mouse you replaced.
If none of these procedures solves the problem, consult the service and support information that came with your computer for instructions on how to contact an