NET.CFG Options Reference
Protocol TCPIP Option
IP_NETMASK net_mask_address [network_name]Specifies the default subnetwork mask if subnetworks are used.
Syntax | ip_netmask net_mask_address [network_name] |
| Replace net_mask_address with the correct |
| subnetwork mask address in dotted notation. If |
| this parameter is missing or is 0.0.0.0, the protocol |
| stack uses BOOTP or Reverse ARP to determine |
| the IP address. |
| Replace network_name with a descriptive name |
| for this network connection. The network_name |
| is used with the BIND, IP_ADDRESS, and |
| IP_ROUTER parameters to distinguish between |
| the values for each network connection. |
| The network name is required only if you are |
| configuring multiple ODI LAN drivers for TCP/ |
| IP. |
|
|
Default | None |
|
|
Example | To set the IP netmask for your client workstation and |
| distinguish your connection to the network, you could |
| place the following lines in your NET.CFG file: |
| protocol tcpip |
| bind ne2000 2 |
| ip_address 129.47.6.84 |
| ip_router 144.52.6.6 |
| ip_netmask 255.255.0.0 |
|
|