System Messages | HP UX Internet and Networking Software guide

System Messages

Action: No action is required at this point. However, to avoid this message the next time the VLM.EXE ﬁle is loaded, delete or correct the line speciﬁed by the error message.

VLM-1.00-43: There is a missing or invalid ON/OFF value for ‘<parameter>’ on line <number> of the conﬁguration ﬁle. This entry will be ignored. Correct the line speciﬁed in the conﬁguration ﬁle before continuing.

Explanation: The conﬁguration ﬁle contains a parameter that is deﬁned to use either an ON or OFF value, but a different value or no value has been speciﬁed. This invalid line is ignored by the conﬁguration process.

Action: No action is required at this point. However, to avoid this message the next time the VLM.EXE ﬁle is loaded, delete or correct the line speciﬁed by the error message.

VLM-1.00-44: There is an invalid string length speciﬁed for ‘<parameter>’ on line <number> of the conﬁguration ﬁle. This entry will be ignored. Correct the line speciﬁed in the conﬁguration ﬁle before continuing.

Explanation: The conﬁguration ﬁle contains a parameter that is deﬁned to use a string of a speciﬁed minimum or maximum length, but a string has been entered that does not ﬁt the speciﬁed limits. This invalid line is ignored by the conﬁguration process.

Action: No action is required at this point. However, to avoid this message the next time the VLM.EXE ﬁle is loaded, delete or correct the line speciﬁed by the error message.

VLM-1.00-45: The parameter speciﬁed for the following option was out of range and has been adjusted.

Explanation: A conﬁgurable parameter has been conﬁgured too high or too low to be valid. The parameter is speciﬁed on the line following the message.

Action: Check and correct the parameter speciﬁed in the NET.CFG ﬁle. See Chapter 2, “NET.CFG Options Reference,” for more information.

VLM-1.00-46: A duplicate VLM ID was found during VLM load test. The ﬁle will not be loaded. check the VLM= and USE DEFAULTS= parameters speciﬁed in the NET.CFG ﬁle before continuing.

4-37

Image 209

HP UX Internet and Networking Software manual System Messages

Contents

Edition HP 9000 NetworkingHP Part No. J2771-90016 Hewlett-Packard Co Homestead Road Cupertino, CA 95014 USA Printing History Introduction Preface This manual uses the following Novell conventions Asterisk Documentation Conventions Syntax Vii Supplemental Documentation Preface Preface Contents Creating and Modifying a NET.CFG File NET.CFG Options Reference Overview 2-2 Introduction Alternate Link Driver Option NetWare DOS Requester Option Link Support Option Network PRINTERS=number Protocol Tcpip Option Protocol IPX Option 103Protocol SPX Option Introduction Core NetWare Client Software Transport Provider IPX UDP Option Dosnp Software Optimizing the NetWare Client Software Topic Overview Introduction Increasing Speed Using the Packet Burst ProtocolRequirement for Packet Burst How Packet Burst Works Using Large Internet Packet Functionality Configuring for Packet BurstWhen to Use Packet Burst Disabling Packet Burst How Large Internet Packet Works Configuring for Large Internet PacketWhen to Use Large Internet Packet Disabling LIP How NCP Packet Signature Works Using NCP Packet Signature to Improve SecurityImproving Security NCP Packet Signature Levels Level Number Explanation When to Use NCP Packet SignatureNCP Packet Signature Options Solution Examples of Using Packet Signature LevelsEffective Packet Signature Levels Server = Client Workstation Is Publicly Accessible Installing NCP Packet SignatureWorkstation Setting Client Workstation Users Often Change Locations Disabling Packet Signature Server Setting Client Workstations Cannot Log Troubleshooting NCP Packet SignatureClient Workstations Are Not Signing Packets Problem Insecure Client Workstations Log In to a Secure Server Third-Party NLM Programs Do Not Work Using Other Client Security Guidelines Topic Reference Additional Information NET.CFG Options Reference NET.CFG Options Reference Introduction Entering Options and Parameters into the NET.CFG File Creating and Modifying a NET.CFG File Following ﬁgure illustrates the NET.CFG ﬁle format Sample NET.CFG FileFollowing is a sample NET.CFG ﬁle that NET.CFG File Format NET.CFG file Using NET.CFG Options and Parameters Link driver drivername NET.CFG Options Desktop snmpLink support Netware dos requester NET.CFG Options Protocol tcpip Protocol ipxProtocol spx Transport provider ipx udp Format of NET.CFG Reference Pages Using the NET.CFG Reference Pages Available Parameters and Values for the Desktop Snmp Option Desktop Snmp OptionCategory Parameters and Values MIB-II Asynchronous Timeout number Asynchronous Timeout ConnectionsSyntax Parameter and Value Community Types and Names Default Example Snmpenableauthentraps on Speciﬁes the monitor community name DefaultDesktop Snmp Option Parameters for Community Names Parameter Explanation Speciﬁes the control community name Community Access ManagementSpeciﬁes the trap community name Control Community name public private Value Explanation Desktop Snmp Option Values for Community Type Parameters Enables the value settings for the trap community Enables the value settings for the monitor communityEnables the value settings for the control community Example of NET.CFG Files Using the Community Name and Types System and Snmp Groups MIB-II Management Information Base SupportDesktop Snmp automatically supports three MIB-II groups Explains these parameters That an unauthorized user is tying to access the networkAuthority Management stations or reported in Snmp traps Syscontact contact Snmpenableauthentrap on off Syslocation location Informs the Snmp manager of your usernameSysname name Interface Group Example of NET.CFG File Including Each Group Support TCP/IP Groups Available Parameters and Values for the Link Driver Option Link Driver OptionLink Driver drivername This option has the following parameters and values BUS ID name number DMA #1 #2 channelnumber Bus Type Identiﬁcation NumberISA MCA Eisa Pcmcia PCI Frame frametypename addressingmode For example, the frame type Token-Ring can be used in LSB Frame Types, Protocols, and LAN Drivers Frame Type and Description Protocols LAN Drivers List of Frame Types, Protocols, and LAN Drivers Token-Ring LAN Drivers For token ring, enable token ring frame typesEthernet LAN Drivers MAX Frame Size number IRQ #1 #2 interruptrequestnumber MEM #1 #2 hexstartingaddress hexlength Speciﬁes a memory range to be used by the network board Replace hexstartingaddress with Node Address hexaddress mode Lansup Port #1 #2 hexstartingaddress hexnumberofports Protocol name hexprotocolID frametype Defined Protocols and Frame TypesAllows existing LAN drivers to handle new network protocols Slot number Numbers Frame Protocol Frame Type DescriptionEthernetii IPX/SPX Driver Name Network Board COM Listing of Commonly Used ODI LAN Drivers E20ODI CeodiE2HODI E30ODI Madgeodi LansupNCRWL05 NE2 OC32TR16.COM NulldrvOCTOK16.COM OSH391R SMC PC600WS/650WS SmcarcwsT20ODI T30ODI Available Parameters and Values for the Link Support Option Link Support Option Buffers communicationnumber buffersize Default MAX Boards number Default Range Example Mempool number k MAX Stacks number Link support Mempool Current Core Virtual Loadable Module VLM Programs NetWare DOS Requester Option Module Name Description Current Non-Core Virtual Loadable Module Programs Compatibility with NetWare Shell Parameters Packets Parameters and Values Status VLM=C\NWCLIENT\CONN.VLM Managing the NetWare DOS RequesterCondition Explanation Best Performance Optimizing the NetWare DOS RequesterVLM /C=C\NWCLIENT\NET.CFG NetWare DOS Requester Option Best Conventional Memory Usage This entry indicates the following Best Compromise Parameters and Values NetWare DOS Requester Option Modules Auto Large TABLE=on off Default Range Modules Default ModulesAuto RECONNECT=on off AUTO.VLM, NDS.VLM Average Name LENGTH=number Broadcast RETRIES=number Bind RECONNECT=on offAUTO.VLM, BIND.VLM Broadcast TIMEOUT=number Broadcast Send DELAY=numberBetween performing any function Serial links on your network Cache Buffer SIZE=number Cache WRITES=on off IPXNCP.VLM, NWP.VLM CHECKSUM=number VLM.EXE Confirm Critical Error ACTION=on off CONNECTIONS=number Sets the name of the operating system used in the shellAUTO.VLM, CONN.VLM, FIO.VLM, NDS.VLM SECURITY.VLM DOS NAME=name GENERAL.VLM, NETX.VLM MsdosEOJ=on off NETX.VLM, REDIR.VLM Range Modules Exclude VLM=pathvlmFirst Network DRIVE=driveletter GENERAL.VLM, NETX.VLM, REDIR.VLM Force First Network DRIVE=on off Handle NET ERRORS=on off Large Internet PACKETS=on off Process across slow links Starting LIP negotiationsConnection table in an Upper Memory Block UMB, if available LIP Start SIZE=number Load LOW CONN=on off Load LOW REDIR=on off Load LOW IPXNCP=on off Local PRINTERS=number Lock RETRIES=number Lock DELAY=number Long Machine TYPE=name IBM-PC Allow several applications to run simultaneouslyMAX TASKS=number Message LEVEL=number Default Range Message TIMEOUT=number Name CONTEXT=namecontext Minimum Time to NET=number Netware PROTOCOL=netwareprotocollist Network PRINTERS=number PB BUFFERS=number Sets the read buffer size in bytes for MS WindowsFIO.VLM, IPXNCP.VLM Pburst Read Windows SIZE=number Sets the write buffer size in bytes for MS Windows Preferred TREE=treename Print Buffer SIZE=number Preferred WORKGROUP=workgroupname Print TAIL=number Print HEADER=number Read only COMPATIBILITY=on off Search MODE=number RESPONDER=on off Syntax Search mode=number Default Modules IBM SET Station TIME=on offShort Machine TYPE=name Signature LEVEL=number Show DOTS=on offREDIR.EXE Syntax True commit=on off Default Off Modules = Enabled but not preferred = Preferred = RequiredNWP.VLM, SECURITY.VLM True COMMIT=on off USE DEFAULTS=on off VLM=pathVLM Workgroup NET=workgroupnetaddress 102 Available Parameters and Values for the Protocol IPX Option Protocol IPX Option INT64 on off Bind LANdrivername #number INT7A on off IPX Packet Size Limit number Ipatch byteoffset, value Syntax IPX Sockets number IPX Retry Count number 108 Available Parameters and Values for the Protocol SPX Option Protocol SPX Option Minimum SPX Retries number SPX Abort Timeout number SPX Connections number SPX Listen Timeout number SPX Verify Timeout number Protocol SPX Option 113 LAN Protocol Tcpip OptionNbadapter 0 Nbbrdcast 0 LAN Drivers Nobootp Bind odidriver number frametype networkname IP Addresses Ipaddress ipaddress networkname Speciﬁes the IP address for your client workstation Ipnetmask netmaskaddress networkname Speciﬁes the default subnetwork mask if subnetworks are used Iprouter ipaddress networkname Connection Sockets Tcpsockets number Transmission Control Protocol TCP Sockets Udpsockets number User Datagram Protocol UDP Sockets Rawsockets number Raw Sockets Additional Support Path Tcpcfg drive path Transport Provider IPX UDP Transport Provider IPX UDP Option Trap Target ipxaddress ipaddress Transport Provider IPX UDP Option 128 Command Line Parameters Reference Command Line Parameters Reference Programname Convention Explanation Software Explanation Core NetWare Client SoftwareExplanation of the Core NetWare Client Software Parameter Option Explanation IPXODI.COM This command indicates the following Syntax for using these parameters is as follows VLM.EXE ODI LAN driver.COM VLM /D /C=C\NWCLIENT\NET.CFG /PS=SALES /MC This command indicates the following Dosnp Software System Messages System Messages System Messages System Messages System Messages System Messages DOSCLINST-1.0-1 Filename could not be installed Action Delete unnecessary ﬁles from the hard disk DOSCLINST-1.0-3 The INSTALL.OVL ﬁle could not be found System Messages System Messages System Messages System Messages System Messages System Messages IPXNCP.VLM System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages VLM-1.00-9 The VLM.EXE ﬁle is testing the VLMs System Messages System Messages VLM-1.00-37 The VLM.EXE ﬁle is using expanded memory EMS VLM-1.00-39 The VLM.EXE ﬁle is using extended memory XMS System Messages Try one or more of the following System Messages System Messages Index Enable Control Community Lock Delay NetWare DOS Requester Monitor Community Desktop Snmpenableauthentrap Unix conventions, explained commands Index