NET.CFG Options Reference
Protocol IPX Option
Protocol IPX Option
Use this option of the NET.CFG file to change the default value of parameters for the IPX™ protocol.
Available Parameters and Values for the Protocol IPX Option
This option has the following parameters and values, which are discussed on the following pages:
Parameters and Values
BIND LAN_driver_name [#number]
INT64 [on off]
INT7A [on off]
IPATCH byte_offset, value
IPX PACKET SIZE LIMIT number
IPX RETRY COUNT number
IPX SOCKETS number
PROTOCOL IPX
Specifies the protocol option you are making configurations for.
Syntax | protocol ipx |
| parameter_name value |
| Replace parameter_name with the name of the |
| parameter you want to use. |
| Replace value with the value setting which |
| corresponds with the parameter name. |
|
|
Example | To configure for the IPX protocol to not use interrupt 64h, |
| you would place the following lines in your NET.CFG file: |
| protocol ipx |
| int64 off |
|
|