NET.CFG Options Reference
Transport Provider IPX UDP Option
Transport Provider IPX UDP Option
The Desktop SNMP transport providers, STPIPX.COM and STPUDP.COM, read the configuration file to discover trap targets on NetWare networks.
Use this option of the NET.CFG file to specify the trap target address for your SNMP desktops. For more information, see “Desktop SNMP Option.”
Available Parameters and Values for the Transport Provider IPX UDP Option
This option has the following parameter and value, which are discussed on the following pages:
Parameter and Value
TRAP TARGET ipxaddress ipaddress
TRANSPORT PROVIDER IPX UDP
Specifies the Transport Provider option IPX or UDP configurations.
Syntax | transport provider ipx udp |
| parameter_name value |
| Replace parameter_name with the name of the |
| parameter you want to use. |
| Replace value with the value setting which |
| corresponds with the parameter name. |
| Select either IPX or UDP as the transport protocol |
| used by the management station. |
|
|
Example | To set your client workstation for a management station of |
| “ab123456:0123456789ab,” you would place the |
| following lines in your NET.CFG file: |
| transport provider ipx |
| trap target ab123456:0123456789ab |
|
|