HP UX Internet and Networking Software manual LAN Drivers, Nobootp

NET.CFG Options Reference

Protocol TCPIP Option

Category	Parameters and Values
Additional	NO_BOOTP
Support	PATH TCP_CFG [[ drive: ]path [ ; ... ]]

PROTOCOL TCPIP

Specifies the protocol option you are making configurat ions for.

Syntax	protocol tcpip
	parameter_name value
	Replace parameter_name with the name of the
	parameter you want to use.
	Replace value with the value setting which
	corresponds with the parameter name.
Example	To set the IP address for your client workstation and
	distinguish your connection to the network, you could
	place the following lines in your NET.CFG file:
	protocol tcpip
	bind ne2000 2 finance-net
	ip_address 129.47.30.6 finance-net

LAN Drivers

Use this parameter and value to bind the TCP/IP protocol stack to a LAN driver., which is discussed on the following page.

Parameter and Value

BIND odi_driver [number frame_type network_name]

The NetWare Client for DOS and MS Windows software provides ODI LAN drivers and COMn device drivers for the TCP/IP protocol stack.

2-115