| NET.CFG Options Reference | |
| NetWare DOS Requester Option | |
|
|
|
Syntax | print tail=number |
|
|
|
|
Default | 16 |
|
|
|
|
Range | 0 to 1024 |
|
|
|
|
Modules | PRINT.VLM |
|
|
|
|
Example | To increase the size of the print header, you could place the |
|
| following lines in your NET.CFG file: |
|
| netware dos requester |
|
| print header=64 |
|
|
|
|
READ ONLY COMPATIBILITY=[on off]
Determines whether a file marked Read Only can be opened with a read/ write access call.
Certain applications require the value for this parameter to be set to “on.” See the documentation provided with your application for details.
Prior to NetWare 2.1, a program could open a Read Only file with write access without getting an error, though any attempt to write to the file produced an error.
To be compatible with DOS, NetWare 2.1 or later does not allow a Read Only file to be opened for write access.
Setting this parameter to “on” causes the shell to revert to the old mode and allow the open request to succeed.
Syntax | read only compatibility=[on off] |
|
|
Default | off |
|
|
Modules | REDIR.VLM |
|
|
Example | To cause the shell to revert to the old mode and allow the open |
| request to succeed, you would place the following in your |
| NET.CFG file: |
| netware dos requester |
| read only compatibility=on |
|
|