NET.CFG Options Reference
Protocol TCPIP Option
Protocol TCPIP Option
Use this option of the NET.CFG file to configure the TCP/IP protocol stack used by the TCPIP.EXE program. The TCPIP.EXE program reads the NET.CFG file for configuration information while loading.
Run the TCP/IP Transport for DOS installation program provided on the TCP/IP Transport for DOS diskette to obtain a copy of the TCPIP.EXE file. See Chapter 1, “Installing the Transport,” in TCP/IP Transport for DOS Installation Guide for instructions.
Available Parameters and Values for the Protocol TCPIP Option
This option has the following categories, parameters, and values, which are discussed on the following pages:
Category | Parameters and Values |
|
|
LAN | BIND odi_driver [number frame_type |
Drivers | network_name] |
|
|
IP | IP_ADDRESS ip_address [network_name] |
Addresses | IP_NETMASK net_mask_address |
| |
| [network_name] |
| IP_ROUTER ip_address [network_name] |
|
|
Connection | TCP_SOCKETS number |
Sockets | UDP_SOCKETS number |
| |
| RAW_SOCKETS number |
|
|
NetBIOS | NB_ADAPTER [0 1] |
Support | NB_BRDCAST [0 1] |
| |
| NB_COMMANDS number |
| NB_DOMAIN domain_name |
| NB_SESSIONS number |
|
|