HP UX Internet and Networking Software manual Show DOTS=on off, Redir.Exe, Signature LEVEL=number

NOTE:

NOTE:

	NET.CFG Options Reference
	NetWare DOS Requester Option
Range	1 to 4
Modules	GENERAL.VLM, NETX.VLM
Example	To specify the machine type as AST, you would place the
	following lines in your NET.CFG file:
	netware dos requester
	short machine type=“ast”

SHOW DOTS=[on off]

Specifies to display parent dots in list boxes for file and directory navigation.

This parameter is supported only by NetWare 2.11 and later.

The NetWare server doesn’t have directory entries for (“.” and “..”) as DOS does. To see “.” and “..” in directory listings, set the value for this parameter to “on.”

Syntax	show dots=[on off]
Default	off
Modules	REDIR.EXE
Example	To see parent dots in a directory listings, you would place the
	following lines in your NET.CFG file:
	netware dos requester
	show dots=on

You should set SHOW DOTS=ON when using MS Windows 3.x or DOS graphical user interface (GUI) with NetWare.

SIGNATURE LEVEL=number

Designates the level of enhanced security support.

Enhanced security includes the use of a message digest algorithm and a per connection/per request session state. The values are as follows:

0 = Disabled (the SECURITY.VLM file does not load)

2-97