NET.CFG Options Reference
NetWare DOS Requester Option
Leaving the value for this parameter set to the “on” default can cause data loss if the NetWare server runs out of disk space between write requests.
Syntax | cache writes=[on off] |
|
|
Default | on |
|
|
Modules | FIO.VLM |
|
|
Example | To increase data integrity at the expense of performance, |
| you could place the following lines in your NET.CFG file: |
| netware dos requester |
| cache writes=off |
|
|
CHECKSUM=number
Provides a higher level of data integrity by validating NetWare Core Protocol™, or NCP™, packets.
Setting the value for this parameter to 2 or 3 increases data integrity but decreases performance. The checksum values are the following:
0 = Disabled
1 = Enabled but not preferred
2 = Enabled and preferred
3 = Required
Syntax | checksum=number |
|
|
Default | 1 |
|
|
Modules | IPXNCP.VLM, NWP.VLM |
|
|
Example | To increase data integrity at the expense of performance, |
| you could place the following lines in your NET.CFG file: |
| netware dos requester |
| checksum=3 |
|
|