HP UX Internet and Networking Software manual Trap Target ipxaddress ipaddress

NET.CFG Options Reference

Transport Provider IPX UDP Option

TRAP TARGET ipxaddress ipaddress

Trap targets define the addresses that the SNMP manager sends SNMP traps to.

To receive traps sent by Desktop SNMP, make sure your management workstation address is listed in the IPX (for IPX transport) or UDP (for UDP/IP transport) section of the NET.CFG file.

NOTE:If you do not configure at least one trap target, Desktop SNMP does not send traps.

Syntax	trap target ipxaddress ipaddress
	Replace ipxaddress or ipaddress with the
	management station address for IPX transport or
	for UDP/IP transport, respectively.
Default	None
Example	To set your client workstation for a management station of
	“ab123456:0123456789ab,” you would place the
	following lines in your NET.CFG file:
	transport provider ipx
	trap target ab123456:0123456789ab
	To set your client workstation to use both IPX and
	UDP/IP transport you could place the following lines
	in your NET.CFG file:
	transport provider ipx
	trap target ab123456:0123456789ab
	trap target cd654321:ba9876543210
	transport provider udp
	trap target 999.88.77.66
	trap target 888.11.22.33

2-127