HP UX Internet and Networking Software manual System Messages

System Messages

Action: If you want NCP authentication, make sure that SECURITY.VLM is configured to load before NWP.VLM and that it loads successfully before attempting to load NWP.VLM. If you do not want NCP authentication, add SIGNATURE LEVEL=0 to the NetWare DOS Requester section of the NET.CFG file. See Chapter 2, “NET.CFG Options Reference,” for more information.

REDIR-1.00-1: The message file <name> is invalid. The program cannot be loaded.

Explanation: The .MSG file is invalid. This problem could be the result of a corrupted file, a bad translation, or an outdated file version.

Action: Either update the .MSG file with a valid copy or delete the file. The NetWare® DOS Requester™ software uses the default messages that are bound to the binary files.

REDIR-1.00-5: <Module1>.VLM is not loaded. The <module2>.VLM file cannot be loaded before <module1>.VLM. Load the <module1>.VLM file first then try to load the <module2>.VLM file.

Explanation: The <module2>.VLM file requires that the <module1>.VLM file be loaded. Either the current configuration has <module1>.VLM and <module2>.VLM loading out of order, or <module1>.VLM did not load successfully.

Action: Make sure that <module1>.VLM is configured to load before <module2>.VLM. To do this, change the load order of the VLM= parameter in the NET.CFG file.

REDIR-1.00-7: In order to load the <module3>.VLM, one of the

following VLMs must be loaded: <module1>.VLM, <module2>.VLM.

Explanation: The <module3>.VLM file requires that the <module1>.VLM or <module2>.VLM file be loaded. Either the current configuration has <module3>.VLM loading before <module1>.VLM or <module2>.VLM, or <module1>.VLM or <module2>.VLM did not load successfully.

Action: Make sure that <module1>.VLM or <module2>.VLM loads successfully before <module3>.VLM.

REDIR-1.00-42: There is a missing or invalid value for ‘<parameter>’ on line <number> of the configuration file. This entry will be ignored. Correct the line specified in the configuration file before continuing.

4-25