System Messages

Explanation: The <module3>.VLM file requires that the <module1>.VLM or <module2>.VLM file be loaded first. Either the current configuration has <module3>.VLM loading before <module1>.VLM or <module2>.VLM, or <module1>.VLM or <module2>.VLM did not load successfully.

Action: Make sure that <module1>.VLM or <module2>.VLM loads successfully before <module3>.VLM.

FIO-1.00-42: There is a missing or invalid value for ‘<parameter>’ on line <number> of the configuration file. This entry will be ignored. Correct the line specified in the configuration file before continuing.

Explanation: The configuration file contains a parameter that has an invalid value or that does not specify a value. This invalid line is ignored by the configuration process.

Action: No action is required at this point. However, to avoid this message the next time the VLM.EXE file is loaded, delete or correct the line specified by the error message.

FIO-1.00-43: There is a missing or invalid ON/OFF value for ‘<parameter>’ on line <number> of the configuration file. This entry will be ignored. Correct the line specified in the configuration file before continuing.

Explanation: The configuration file contains a parameter that is defined to use either an ON or OFF value, but a different value or no value has been specified. This invalid line is ignored by the configuration process.

Action: No action is required at this point. However, to avoid this message the next time the VLM.EXE file is loaded, delete or correct the line specified by the error message.

FIO-1.00-45: The parameter specified for the following option was out of range and has been adjusted.

Explanation: A configurable parameter has been configured too high or too low to be valid. The parameter is specified on the line following the message.

Action: Check and correct the parameter specified in the NET.CFG file. See Chapter 2, “NET.CFG Options Reference,” for more information.

4-9