System Messages

Explanation: The NetWare® DOS Requester™ software cannot function properly when loaded after a task switcher. A task switcher has been previously loaded. (Task switchers include DR DOS® TaskMax, MS-DOS* 5.0 DOSSHELL, and MS Windows 3.1 in standard mode.)

Action: Unload the task switcher before attempting to load the NetWare DOS Requester.

VLM-1.00-31: Network error on server <name>. Check network cabling or server status.

Explanation: This is a critical communications error between the client workstation and the NetWare® server. This error may also appear as “General failure on device NETWORK.” A communications error can be caused by either a hardware or software failure.

Action: Check the hardware and make sure that the network cable is connected properly and that the NetWare server is up and running properly. If the condition persists, report the problem to your Novell Authorized ResellerCLM representative.

VLM-1.00-32: The VLM.EXE file is not loaded. VLM.EXE cannot be unloaded.

Explanation: An attempt was made to unload the VLM.EXE file using the / U parameter.

Action: The condition that caused this message to occur is invalid, so no action is required.

VLM-1.00-33: The loaded VLM.EXE file has a different version. VLM.EXE cannot be unloaded. Make sure the VLM.EXE file you are using has the same version number and then try to unload VLM.EXE.

Explanation: An attempt was made to unload the VLM.EXE file using the / U parameter.

Action: Use the same version of the VLM.EXE file to try the unload as was used to load; otherwise, the VLM.EXE file that is loaded in memory can be removed only by rebooting the computer.

4-34