Mitsubishi Electronics WD-52327, WD-62327 manual Connecting a DVD Player or Other S-Video Device

Connecting a DVD Player or Other S-Video Device

DVD Player with Component Video (Recommended)

(Figure 9)

1.Connect the Component Video cables from (YCb Cr or YPbPr) VIDEO OUT on the back of the DVD player to COMPONENT (1 or 2) on the TV back panel. The correct connections are:

A.Y to Y

B.Cb or Pb to Pb

C.Cr or Pr to Pr

2.Connect a set of audio cables from AUDIO OUT on the back of the DVD player to COMPONENT AUDIO Input (1 or 2) on the TV back panel.

•The red cable connects to the R (right)channel

•The white cable connects to the L (left) channel

Note: Some video game systems support DTV resolutions via component connections. Please refer to your video game console Owner’s Guide for setup information.

Note: For optimal DVD playback performance, Mitsubishi recommends using a progressive scan DVD player, set to play in progressive scan mode. You will also want to set your player to display 16:9 widescreen. Please refer to your DVD player’s Owner’s Guide.

				���������
				��� � � ����� �����
	�			�	�
		�
			�
		�	��
		�	� �
						�����
			����� �
			� � �� �
			����� �				�
			�����
						���
							��� ���� �����
�
�						����� ���
	�	�����			��� �� ��������	���	�������������
					������
�
	��					�	�����
�		�						�
	��					�	�� ����������� ���
	����� ���			��������� �������� �����			������� �������
Figure 9. Connecting a DVD Player with Component
Video.

Other S-Video Device

(Figure 10)

1.Connect an S-Video cable from VIDEO OUT on the device back panel to VIDEO INPUT-1 or INPUT-2 on the TV back panel.

2.Connect a set of audio cables from AUDIO OUT on the device back panel to AUDIO INPUT-1 or INPUT- 2 on the TV back panel, matching the input used in step 1.

•The red cable connects to the R (right) channel

•The white cable connects to the L (left) channel

If your S-Video Device is mono (non-stereo), connect only the white (left) cable.

	��������������
	����������������
	� � � � �
	�	�		�
		�������
	�����	� �� ��
		������
		���� �
		������
		������
�		� ����
	���
	������������������
	�����	���������	��������	���������	�
		�	�	�����
	���	�	�
	�	�	�

Figure 10. Connecting an S-Video Device.

See Appendix B, page 59, for component video signal compatibility information.

For digital audio connections, see your

16