![](/images/new-backgrounds/1225608/22560823x1.webp)
Connecting an Antenna or Wall Outlet Cable
Separate UHF and VHF Antennas
(Figure 1)
1.Connect the UHF and VHF antenna leads to the UHF/VHF combiner.
2.Push the combiner onto
UHF/VHF combiners are not provided with the TV. They are available at most electronic stores.
Note: This TV will only be able to provide an analog signal through
See page 5 for Outdoor Antenna Grounding information.
�������������������������
�������������������������������
Twin Lead Antenna, Coaxial Lead Antenna, or Wall Outlet Cable
(Figure 2)
For antenna with twin flat leads:
1.Connect the 300 Ohm twin leads to the transformer.
2.Push the 75 Ohm side of the transformer onto
300 Ohm to 75 Ohm matching transformers are not provided with the TV. They are available at most electronic stores.
For cable or antenna with coaxial lead:
3.Connect the incoming cable to
���������������
��������
�������
��������
��������������
����������
�������
��������
��� | � |
| |
��� |
|
���� ����
�������������������������������
| � �� � |
�� � � � | ��� � � � � � |
Note: This TV will only be able to provide an analog signal through
See page 5 for Outdoor Antenna Grounding information.
�
Figure 1. Connecting separate UHF and VHF antennas.
������������������
��������� �������������
�������������������������������
|
| � �� � |
� | �� � � � | ��� � � � � � |
|
|
�
�
��������������������������
��������������������
Figure 2. Connecting twin lead antenna, coaxial lead antenna, or wall outlet cable.
Additional connection cables are not provided with the TV. They should be available at most electronic stores.
Mitsubishi strongly recommends against using antennas with twin flat leads. Twin flat lead antenna wires are subject to interference which may adversely affect the performance of the TV. We recommend using coaxial antenna cable.
12