Mitsubishi Electronics WD-62327, WD-52327 manual Stereo Audio System, Receiver

Connecting a Stereo Audio System Conecting an Audio Receiver

Stereo Audio System

(Recommended for shelf units or A/V receivers without digital audio inputs)

(Figure 7)

1.Connect the audio cables from AUDIO MONITOR OUTPUT on the TV back panel to TV IN or AUX IN terminals on the back of the audio system.

•The red cable connects to the R (right) channel

•The white cable connects to the L (left) channel

2.Use the AUDIO/VIDEO SETTINGS menu (page 50) to turn off the TV’s speakers.

3.Set the input of the audio system to the TV or AUX position to hear the TV audio through your stereo system.

								�� ���� �����
								�������� �������
								�������	� � � � �
								���
									�	�
										�������
										� ����
					�����					������
				�						���� �
										������
										������
					���					�����
		����� ������ ���� ����� �������
�		��	���		���� �		���� �
	�����	��	��	��	���	��	���	���������
		�						���
								������
	���	�
Figure 7. Connecting the Stereo Audio System.

These types of audio connections do NOT support multi-channel digital audio. Please refer to your other devices Owner’s Guide to verify.

A/V Receiver

(Figure 8)

1.Connect either a video cable or an S-Video cable (but not both) from VIDEO MONITOR OUT on the back of the A/V receiver to VIDEO INPUT-1 or INPUT-2 on the TV back panel.

Note: If the A/V receiver outputs an onscreen menu, this connection allows you to view the receiver’s menu on the television.

2.Connect a video cable from VIDEO MONITOR OUTPUT on the TV back panel to VIDEO TV IN on the back of the A/V receiver.

3.Connect a set of audio cables from AUDIO MONITOR OUTPUT on the TV back panel to AUDIO TV IN on the back of the A/V receiver.

•The red cable connects to the R (right) channel

•The white cable connects to the L (left) channel

	�� �������� ����� ����� ��������
�			�
���	�����		������
				�
				������
				����
				���
				�����
				����
�� ���� ����� �������� �������
�������		� � � � �
���
	�	�
�			�������
			�������
������			������	�
			� ����
�����			������
�			���� �
			������
���
			������
			�����

Figure 8. Connecting the A/V Receiver.

Note: Please see your A/V receiver Owner’s Guide for more detailed connections.

15