Mitsubishi Electronics WD-62327 manual Appendix B High Definition Input Connection Compatibility

Appendix B: High Definition Input Connection Compatibility

Component Inputs

These inputs are compatible with most standard DVD and DTV signals with component video outputs. Compatible DTV signals are SDTV 480i, 480p, and HDTV 1080i.

All other DTV signals, such as 720p, need to be converted by the DTV receiver (or compatible device) to one of the compatible signal types. Please check the specifications on your device before connecting.

DTV Input

These inputs are compatible with most standard DVD and DTV signals with component video outputs. Compatible DTV signals are SDTV 480i, 480p, and HDTV 1080i.

All other DTV signals, such as 720p, need to be converted by the DTV receiver (or compatible device) to one of the compatible signal types. Please check the specifications on your device before connecting.

This input is also compatible with some DTV receivers using RGB or RGB with “separate H and V sync.” Industry standards for DTV RGB signals systems, synchronization, timing, and signal strengths are

not currently established. These inputs will not be compatible with all DTV receivers that offer RGB. If your DTV receiver offers both DTV component video signals and DTV RGB signals, Mitsubishi suggests you use the DTV component video signals. Please check the DTV receiver specifications before connecting.

Input Levels with Component Video

• Y		= 1.0Vp-p (includes sync) 75ohms
•	Pb	= 700mVp-p, 75ohms (can also receive
		signals from outputs labeled B-Y and Cb)
•	Pr	= 700mVp-p, 75ohms (can also receive
		signals from outputs labeled R-Y and Cr)

Input Levels When Used With Component Video Signals

EIA - 770.3 Standard Levels

• Y	= 1.0Vp-p (includes sync) 75ohms
• Pb	= 700mVp-p, 75ohms
• Pr	= 700mVp-p, 75ohms

•H = Not Used

•V = Not Used

Input Levels when Used With RGB Video Signals

• G (Y) = 1.0Vp-p 75ohms (compatible with sync on green)

•B (Pb) = 700mVp-p, 75ohms

•R (Pr) = 700mVp-p, 75ohms

•H = 4Vp-p+/-1.0v, 2.2k ohms

(when using separate H and V sync)

• V = 4Vp-p+/-1.0v, 2.2k ohms

Input when Used With DVI

•HDCP compliant

•E-EDID (Enhanced-Extended Display Identification)

1.3compliant

DVI-D uncompressed, high-speed, digital single-link connection

• Compatible scan rates are 1080i, 480p, 480i

59