Listen Technologies IS 6132P user manual Speaking too fast, Call, Engaged, Error indication

Danish Interpretation Systems User Manual

Speaking too fast)

When pushing this button the LED in the Speaking too fast button lights in 10 sek. in all IS 6132 units.

And at the same time the Speaking too fast indication will be indicated in units supporting this function (as some CM6xxx units or PC with SW 6000 software)

Call

Not implemented.

A-Engaged

The yellow LED is lit if the channel is occupied either by another interpreter or the interpreters set itself occupies the channel.

B-Engaged

The yellow LED is lit if the channel is occupied either by another interpreter or the interpreters set itself occupies the channel.

Error indication

If errors occur in the communication with the CU it will be indicated by the interpreters set. The set has two error thresholds. The first threshold is reached when audio-data from the CU contains too many errors for the sound to be reproduced correctly. This is indicated by a black matrix in the normal operation display and by the communication display when the set is un-initialised. The second threshold is reached when the frame error rate reaches a higher predefined value. When this happens the set will enter the communication status display regardless of the state the set was in before errors occurred.

The error status is checked every 5 seconds and when no errors has occurred since the last check the set enters the operation mode it was in before errors was detected.

Manual 01 18 04445 13