L300/L230/L130 User Manual
20
Using Your L-series Access Device

L130/L230 Access Devices

(For L300 devices, see next section)
The available connection list shows the vSpace hosts to which the device can connect. Select a host from the
list and click on the "Connect" button to start.
The "Refresh" button refreshes the available connection list.

The Options Menu

The "Options" button brings up a menu where you can view and change the access device's settings.
Within the “Options” screen, the "Reset" button resets the access device
The "Info" button brings up a window to view the following information about the access device:
Version: the version of firmware running on the access device
Build: The build number of the firmware running on the access device
Date: The date of the firmware running on the access device
Device Model: The model number of the access device
Loaded Schema Version: The schema version running on the access device
IP Address: The IP address the access device is configured to use
Gateway: The IP gateway the access device is configured to use
MAC Address: The MAC address of the access device
Serial Number: The serial number of the access device
Alias: The alias of the access device, defined using the vSpace admin console