NComputing L300, L230, L130 user manual Password Tab

L300/L230/L130 User Manual

In each profile, there are the following settings:

∙The “Autoconnect Enabled” radio button, when activated, sets the access device to automatically connect to the selected server when the device is turned on.

∙In the “User name” field, you can enter the user name that you want to be entered into the Windows login dialog box upon access device connection.

∙In the “Domain” field (only accessible from the vSpace admin console), you can enter the domain that you want input to the Windows login dialog box upon connection.

∙In the "Programs" section, you can define the application that launches when the access device connects to a host PC using that profile. You can make the desktop come up, or a define a program to be run that’s specified by program name and the folder where it exists on the host PC.

∙In the "Desktop Size" section, you can set the video behavior when the access device connects to a host PC using that profile. You can set the resolution, color depth, and frequency. For example, you can choose a resolution of 1024x768 at a color depth of 16 bits.

∙The "Mode Test" button allows you to choose a desktop setting and do a basic test to see if it works with your monitor. Click on the button and the video output will change to the specified resolution, color depth and frequency. To exit the video mode test, press the "Esc" key on the keyboard.

∙Click on the "OK" button to save the changes and close the window.

∙Click on the "Cancel" button to discard the changes and close the window.

Note: Some monitors may not properly display certain video modes.

The “Password” Tab

The "Password" tab contains settings for protecting the access device options with a password.

If you select "Do not use Password", there will be no password required to view or change the access device's settings.

If you select "Protect device Setup Options with Password, a dialog box will pop up where you will be required to enter a password twice. Then, when users click on the "Setup" button in the "Options" sub-menu, they will be asked to enter the password. No other menus are affected by this password.

NComputing recommends setting the password to improve security.

23