Powerware FE/QFE UPS Command, Function, Date, Delay, Represents 2.5 mi lisec, Display, Format

				m
Command	Short	Password	delay. For a -second delay, enter delay 400.
			Function
	Form
date	da	None*	Displays[month]/[day]/[year]system time and date. To s t the date, enter ate
			.
delay	dl	None	Delays next command when you nter number after delay. Each unit
			represents 2.5 mi lisec	nds, so delay1would cause a 2.5 millisecond
display	d	Depends	Displays the values of	ne or more parameters (see Table 4 on page 32).
		on	Format: display [parameter # or name] [parameter # or name]
		parameter	Example: d1fullloadoldisplays the values of parameters 1, 16 and 21
		password
extendedhistory	xh	None	Displays the minimum and maximum values of parameters 1 (Vac In),
			2 (Vac Out), 7 (Vdc) and 5 (VA Out); the command then clears the
			minimum and maximum values (see Table 4 on page 32).
format	f	None	Displays an 80-character line containing information on the FERRUPS’
			status. CheckUPS II and other UPS monitoring software use this data.
help	? or he	None	Shows a list of terminal/computer commands.
history	h	None	Displays the minimum and maximum values of parameter 1 (Vac In); the
			command then clears the minimum and maximum values.
identify	I	None	Shows Powerware’s address and telephone number and the software
			version.
inverterlog	il	None	Displays the Inverter Log. See “Alarm and Inverter Logs” on page 62.
logs	l	None	Displays both the Alarm and Inverter Logs. See “Alarm and Inverter Logs”
			on page 62.
off [time]	o [time]	None*	Shuts down the UPS a given number of seconds. The READY indicator
		password	Example: Parameters 110displays parameters 1 through 10.
			flashes until the UPS	huts down, and the UPS beeps five seconds before
			shutdown. Example: OFF60shuts down the UPS in 60 seconds.
off [time] autostart	o [time]	None*	Shuts down the UPS in a given number of seconds (see above), and
	a		restarts the UPS sho tly after power returns.
off cancel	o c	None*	Cancels timed shu down.
parameters	p	Depends	Shows a list of syst	parameters. See “Parameters” on page 32. You
		on	can also displ y a range of parameters by entering the starting and
		parameter	ending parameter number or name after the command.

*If you change parameter 39 to “Yes,” this command requires a User password.

Powerware® FERRUPS FE/QFE UPS (500 VA–18 kVA) User’s Guide : Rev A www.powerware.com 45