
ld The AC LINE indicator illuminates (see Figure 2).
NOTE The AC LINE indicator does not illuminate for FE models with serial numbers 25000 and greater until the UPS ON/OFF switch is turned to the ON position.
AC LINE | READY CHARGING BATTERY | ALARM |
| POWER |
|
Figure 2. Front Panel Indicators
nd If you have an external battery cabinet with a DC switch, turn the switch to the ON position.
od Turn the UPS ON/OFF switch to the ON position. After a short startup test, the READY indicator flashes for a few seconds and then remains illuminated. The UPS is ready to supply output power.
NOTE The UPS and external battery cabinets are shipped with the batteries charged. However, batteries may lose some of the charge during shipping and storage. You can use the UPS immediately after unpacking, but it may not provide the
24 hours before the battery is fully charged and full
rd For
NOTE For QFE models, use the supplied UPS cord to connect your equipment to the
UPS output receptacles.
For Hardwired UPSs: Turn the bypass switch to the UPS position.
sd Turn on the equipment that is connected to the UPS.
18 | Powerware® FERRUPS FE/QFE UPS (500 |