Eiki LC-X71 LC-X71L service manual Electrical Parts List, Read Description in the parts list

Electrical Parts List

KE6-X7100 KE6-X71L00

Product safety should be considered when a component replacement is made in any area of a projector. Components indicated by a ! mark in this parts list and the circuit diagram show components whose value have special significance to product safety. It is particularly recommended that only parts specified on the following parts list be used for components replacement pointed out by the mark.

●Read Description in the parts list

Read description in the Capacitor and Resistor as follows:

CAPACITOR CERAMIC 100P K 50V

					Rated Voltage
			Tolerance Symbols:
			Less than 10pF
			A : Not specified	B : ±0.1pF		C : ±0.25pF
			D : ±0.5pF	E : +0 -1pF		F : ±1PF
			G : ±2pF	H : +0.1 -0pF		L : +0 -0.1pF
			R : ±0.25 -0pF S : +0-0.25pF
			More than 10pF
			A : Not specified	B : ±0.1%		C : ±0.25%
			D : ±0.5%	F : ±1%		G : ±2%
			H : ±3%	J : ±5%		K : ±10%
			L : ±15%	M : ±20%		N : ±30%
			P : +100-0%	Q : +30-10%		T : +50-10%
			U : +75-10%	V : +20-10%		W : +100-10%
			X : +40-20%	Y : +150-10%		Z : +80-20%
		Rated value: P=pico farad, U=micro farad
Material:
CERAMIC	Ceramic
MT-PAPER	Metallized Paper
POLYESTER	Polyester
MT-POLYEST	Metallized Polyester
POLYPRO	Polypropylene
MT-POLYPRO....	Metallized Polypropylene
COMPO FILM	Composite film
MT-COMPO	Metallized Composite
STYRENE	Styrene
TA-SOLID	Tantalum Oxide Solid Electrolytic
AL-SOLID	Aluminium Solid Electrolytic
ELECT	Aluminum Foil Electrolytic
NP-ELECT	Non-polarised Electrolytic
OS-SOLID	Aluminium Solid with Organic Semiconductive Electrolytic
POS-SOLID	Polymerized Organic Semiconductive
DL-ELECT	Double Layered Electrolytic
PPS-FILM	Polyphenylene Sulfide Film
MT-PPS-FILM	Metalized Polyphenylene Sulfide Film
MT-PEN-FILM	Metalized Polyethylenenaphthalate Film
CAPACITOR	Other

RESISTOR CARBON 4.7K J A 1/4W

Rated Wattage

Performance Symbols:

A:General B: Non flammable Z: Low noise Other: Temperature coefficient

T: ±10ppm/°C	U: ±25ppm/°C	C: ±50ppm/°C
D: ±100ppm/°C	E: ±200ppm/°C	F: ±250ppm/°C
G: ±350ppm/°C	H: ±1000ppm/°C±10%	W: ±1200ppm/°C±10%

Y:±1400ppm/°C±10% J: ±2000ppm/°C±10% K: ±2400ppm/°C±10%

L:±2700ppm/°C±10% M: ±3000ppm/°C±10% N: ±3300ppm/°C±10%

P:±3600ppm/°C±10% Q: ±3900ppm/°C±10% R: ±4200ppm/°C±10%

S:±4300ppm/°C±10% V: ±4500ppm/°C±10% X: ±8000ppm/°C±10%

			Tolerance Symbols:
			A: ±0.05% B: ±0.1% C: ±0.25% D: ±0.5%
			F: ±1%	G: ±2% J: ±5% K: ±10%
			M: ±20%	P: +5-15% Z: 0 ohm
		Rated value, ohms:
Material:		K: 1,000, M: 1,000,000
CARBON	Carbon
MT-FILM	Metal Film
OXIDE-MT	Oxide Metal Film
SOLID	Composition
MT-GLAZE	Metal Glaze
WIRE WOUND...	Wire Wound
CERAMIC RES.. Ceramic
FUSIBLE RES....	Fusible
RESISTOR	Other

-68-