Eiki LC-X71 LC-X71L Optical Parts Disassemblies, Projection Lens removal, Relay Lens disassembly

Optical Parts Disassemblies

Before taking this procedure, remove Cabinet Top and Main Board following to the “Mechanical Disassemblies”. Disassembly requires a 2.0mm or 2.5mm hex wrench and a slot screwdriver.

Projection Lens removal

1 Shift the Projection lens to the low end by the LENS SHIFT function.

2 Remove Cabinet Front-Top following to the chapter “Mechanical Disassemblies”.

3 Slide the lens lock lever A on the projector to "UNLOCK"(UPPER) posi- tion and remove the Projection Lens ass’y off.

Note : When making unlocking, attach your hand to prevent the lens fall.

4 Disconnect the connector and remove 4 screws B and take the Projection lens from the lens attachment.

2.5mm hex wrench

A

B

Lens attachment

B

Connector

B

B

Fig.1-1 Fig.1-2

Relay Lens disassembly

1 Remove 2 hex screws A and pull the Relay Lens ass’y upward. 2 Remove 2 screws B to take the Lens off from the holder. Note:

There is no mounting direction of the lens.

A

A

Holder

	B
	B
	Relay Lens
Fig.2-1	Fig.2-2

- 12 -