Eiki LC-X71 LC-X71L service manual Polarized Glass-Out and Wide view Glass removal

Optical Pats Disassemblies

Polarized Glass-Out and Wide view Glass removal

1 Remove 4 hex screws A and take the LCD/Prism ass’y off upward.

2 Remove 3 screws B and take the Glass Holder, and then pull the polarized Glass-Out and the wide view glass upwards off. These glasses are mount- ed for R, G and B LCD panels respectively.

Note:

To avoid the CG and focus alignments slipping off, please be careful to han- dle the LCD/Prism ass'y.

A A A LCD Panel/Prism Ass’y

Note:

Do not replace the LCD panel separately otherwise it can not obtain proper picture.

Fig.4-1

B

Polarized Glass-

B B Out

Pre-Polarized

Glass-Out (*1)

Marking(*)

Polarized Glass-Out

*The polarized glass-out for green panel have 2 green marking on top of the glass, and should be placed as in Fig.4-2.

Pre-polarized Glass-Out

*The pre-polarized glass-out should be placed for green and blue panels, not for red panel.

*The pre-polarized glass-out have 1 marking on top of the glass, and should be placed as in Fig.4-2.

* Glasses should be placed as the
sheet attached side comes to the
	Fig.4-2
LCD panel side.

- 14 -