Chapter 7 Configuring and Debugging Fax Services

Using Fax Pass-through Mode

Dial-Peer Level Commands

You can enable fax pass-through mode for communication between a Cisco IOS gateway and the specified Cisco ATA using the following dial-peer level commands:

Procedure

Step 1 Perform the command:

dial-peer voice tag voip

Step 2 Perform the command:

modem passthrough {NSE [payload-type number] codec {g711law g711alaw} [redundancy] system}

a.The default of this command is: modem passthrough system

When using the default configuration, the dial-peer fax pass-through configuration is defined by the voice service voip command. When the system option is used, no other parameters are available.

When the NSE is configured in the fax pass-through command at the dial-peer level, the fax pass-through definition in the dial-peercommand takes priority over the definition in the voice service voip command.

b.The payload-typenumber, codec, and redundancy parameters can also be used. For example, the command:

modem passthrough NSE codec g711law

means that the Cisco ATA will use the NSE payload-type number 100, G.711∝-law codec, and no redundancy in fax pass-through mode.

Step 3 When setting up dial-peer for fax pass-through, it is necessary to set up a pair of dial-peers for inbound and outbound calls between the Cisco ATA and Cisco IOS gateways. You do this by specifying the destination-patternand incoming-called number. The destination-patternshould point to the Cisco ATA, while the incoming-called number should apply to all numbers that the Cisco ATA is allowed to dial.

Disable Fax Relay Feature

Fax relay may be enabled by default for some IOS gateways. If you do not disable the fax relay feature, it may override the precedence of fax/modem pass-through and cause the fax transmission to fail. It is necessary to disable fax relay at the dial-peer or system level with the following command:

fax rate disable

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)

 

OL-4008-01

7-5

 

 

 

Page 135
Image 135
Cisco Systems ATA 188 manual Disable Fax Relay Feature, Perform the command

ATA 188 specifications

The Cisco Systems ATA 188 is a versatile Analog Telephone Adapter designed to facilitate the integration of traditional telephone systems with Voice over Internet Protocol (VoIP) networks. This device has been key in bridging the gap between legacy telephony and modern IP-based communication, allowing users to leverage their existing analog phones while enjoying the benefits of digital connectivity.

One of the main features of the ATA 188 is its ability to connect regular analog phones to a VoIP network, enabling users to make and receive calls over the internet. This significantly reduces calling costs, especially for long-distance and international calls. The ATA 188 supports two phone lines, allowing simultaneous voice calls. This dual-line capability makes it a suitable choice for small businesses or home offices that require multiple lines without the need for extensive infrastructure.

The device is equipped with various technologies that enhance its functionality. It supports the Session Initiation Protocol (SIP) and H.323, making it compatible with a wide range of VoIP service providers. Additionally, the ATA 188 features Quality of Service (QoS) settings, which prioritize voice traffic over the internet, ensuring clear voice quality without interruptions or delays. This is essential for maintaining a professional communication experience, especially in business environments.

Another characteristic of the ATA 188 is its user-friendly configuration interface. It allows users to easily set up and manage their devices through a web-based portal. The configuration process is straightforward, with options to adjust settings such as codec selection, call features including call waiting, and call forwarding functionalities.

Security is also a priority for the ATA 188, as it provides robust protocols to protect call data. The device supports Secure Real-time Transport Protocol (SRTP) and Transport Layer Security (TLS) to encrypt voice traffic and manage signaling securely. This ensures that sensitive conversations remain confidential.

Overall, the Cisco Systems ATA 188 is a reliable and efficient solution for users looking to transition from traditional telephony to VoIP. Its dual-line capacity, compatibility with multiple VoIP standards, user-friendly configuration, and built-in security features make it a valuable asset for both personal and professional communication solutions. In an ever-evolving telecommunications landscape, the ATA 188 remains a relevant and practical choice for integrating legacy telephony with modern internet-based services.