5-2
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)
OL-4008-01
Chapter5 Parameters and Defaults
Configuration Text File Template
Note The term Cisco ATA is used throughout this manual to refer to both the Cisco ATA186 and the
Cisco ATA188, unless differences between the Cisco ATA 186 and Cisco ATA188 are explicitly stated.
Note This section contains recommended values for the United States and Sweden as configuration examples
for certain parameters. For information about other countries, contact the Cisco equipment provider for
a specific country.
Configuration Text File Template
This is a listing of the example_uprofile.txt text file, without its annotations, that comes bundled with
the Cisco ATA software.
You can make a copy of this file and use it as a template for creating your own default configuration file
or Cisco ATA-specific configuration file. For instructions on how to create these configuration files, see
the “Creating Unique and Common Cisco ATA Configuration Files” section on page 3-8.
The example_uprofile.txt file contains all the CiscoATA default values. The sections that follow this
listing describe all the parameters in this file.
#txt
UIPassword:0
UseTftp:1
TftpURL:0
cfgInterval:3600
EncryptKey:0
ToConfig:0
upgradecode:0,0x301,0x0400,0x0200,0.0.0.0,69,0,none
upgradelang:0,0x301,0x0400,0x0200,0.0.0.0,69,0,none
Dhcp:1
StaticIp:0
StaticRoute:0
StaticNetMask:0
GkOrProxy:0
AltGk:0
AltGkTimeOut:0
GkTimeToLive:300
GateWay:0
GateWay2:0.0.0.0
UseLoginID:0
UID0:0
UID1:0
PWD0:0
PWD1:0
LoginID0:0
LoginID1:0
GkId:.
RxCodec:1
TxCodec:1
LBRCodec:0
AudioMode:0x00150015
NumTxFrames:2
CallWaitCallerId:0x003c33d0
Polarity: 0
ConnectMode:0x00060000
AutMethod:0
TimeZone:17