Chapter 2 Installing the Cisco ATA

Installation Procedure

If you are connecting a telephone set that was previously connected to an active telephone line, unplug the telephone line cord from the wall jack and plug it into the Phone 1 input.

Warning To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.

Caution Do not connect the Phone input ports to a telephone wall jack. To avoid damaging the Cisco ATA or telephone wiring in the building, do not connect the Cisco ATA to the telecommunications network. Connect the Phone port to a telephone only, never to a telephone wall jack.

Note The telephone must be switched to tone setting (not pulse) for the Cisco ATA to operate properly.

Step 3 (Optional) Connect the telephone line cord of a second telephone to the Phone 2 input port.

If you are connecting only one telephone to the Cisco ATA, you must use the Phone 1 input port.

Step 4 Connect an Ethernet cable to the uplink RJ-45 connector on the Cisco ATA. For the Cisco ATA 186, this is the 10BASE-T connector; for the Cisco ATA 188, this is the 10/100UPLINK connector.

Use a crossover Ethernet cable to connect the Cisco ATA to another Ethernet device (such as a router or PC) without using a hub. Otherwise, use a straight-through Ethernet cable.

Step 5 (Cisco ATA 188 only—optional) Connect a straight-through Ethernet cable from your PC to the 10/100 PC RJ-45 connector on the Cisco ATA.

Step 6 Connect the socket end of the power cord to the 5V DC power adaptor.

Step 7 Insert the power adaptor cable into the power connector on the Cisco ATA.

Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240VAC, 10A international) is used on the phase conductors (all current-carrying conductors).

Step 8 Connect the plug end of the 5V DC power adaptor cord into an electrical power outlet.

When the Cisco ATA is properly connected and powered up, the green activity LED flashes to indicate network activity. This LED is labeled ACT on the rear panel of the Cisco ATA 186 and is labeled LINK on the rear panel of the Cisco ATA 188.

Caution Do not cover or block the air vents on either the top or the bottom surface of the Cisco ATA. Overheating can cause permanent damage to the unit.

For more information about LEDs and the function button, see the “Hardware Overview” section on page 1-5.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)

2-4

OL-4008-01

 

 

Page 32
Image 32
Cisco Systems ATA 188 manual Installing the Cisco ATA Installation Procedure

ATA 188 specifications

The Cisco Systems ATA 188 is a versatile Analog Telephone Adapter designed to facilitate the integration of traditional telephone systems with Voice over Internet Protocol (VoIP) networks. This device has been key in bridging the gap between legacy telephony and modern IP-based communication, allowing users to leverage their existing analog phones while enjoying the benefits of digital connectivity.

One of the main features of the ATA 188 is its ability to connect regular analog phones to a VoIP network, enabling users to make and receive calls over the internet. This significantly reduces calling costs, especially for long-distance and international calls. The ATA 188 supports two phone lines, allowing simultaneous voice calls. This dual-line capability makes it a suitable choice for small businesses or home offices that require multiple lines without the need for extensive infrastructure.

The device is equipped with various technologies that enhance its functionality. It supports the Session Initiation Protocol (SIP) and H.323, making it compatible with a wide range of VoIP service providers. Additionally, the ATA 188 features Quality of Service (QoS) settings, which prioritize voice traffic over the internet, ensuring clear voice quality without interruptions or delays. This is essential for maintaining a professional communication experience, especially in business environments.

Another characteristic of the ATA 188 is its user-friendly configuration interface. It allows users to easily set up and manage their devices through a web-based portal. The configuration process is straightforward, with options to adjust settings such as codec selection, call features including call waiting, and call forwarding functionalities.

Security is also a priority for the ATA 188, as it provides robust protocols to protect call data. The device supports Secure Real-time Transport Protocol (SRTP) and Transport Layer Security (TLS) to encrypt voice traffic and manage signaling securely. This ensures that sensitive conversations remain confidential.

Overall, the Cisco Systems ATA 188 is a reliable and efficient solution for users looking to transition from traditional telephony to VoIP. Its dual-line capacity, compatibility with multiple VoIP standards, user-friendly configuration, and built-in security features make it a valuable asset for both personal and professional communication solutions. In an ever-evolving telecommunications landscape, the ATA 188 remains a relevant and practical choice for integrating legacy telephony with modern internet-based services.