6-4
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide H.323
OL-4008-01
Chapter6 Call Commands
Syntax
Input Sequence IdentifiersAction Identifiers
Table6-2 Input Sequence Identifiers
Identifier Input Sequence
0-9,#* DTMF digits
f hook flash
ooff-hook
@ anytime; for example, @f means anytime hook-
flash occurs
h on-hook
S#|*
N 0|1|2|3|4|5|6|7|8|9
DN|S
v a variable number (1 or more) of characters
from the above list. It must be followed by a
character which acts as the terminator of this
variable part.
Table6-3 Action Identifiers
Identifier Action
A NONE
B Seizure (User intends to dial or configure)
C C ontinue to dial
D Call Return
E Hold the active call
F Retrieve the waiting call
G Cancel the call attempt
H Disconnect the call
I Blind transfer the call to the number
N Go to configuration mo de
O Releas e the call
P Answer the incoming call
Q Transfer with consultation
R Say busy to the caller
aNone
b Forward all calls to the given number