5-43
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)
OL-4008-01
Chapter5 Parameters and Defa ults
Optional Feature Parameters
The following settings are recommended for Sw eden:
•DialTone = "1,30959,0,4253,0, 1, 0, 0,1500" (approximately -5 dBm)
•BusyTone = "1,30959,0,2392,0, 0, 2000, 2000,0" (approximately -10 dBm)
•ReorderTone = "1,30959,0,2392,0, 0, 2000, 6000,0" (approximately -10 dBm)
•RingBackTone = "1,30959,0,2392,0, 0, 8000, 40000,0" (approximately -10 dBm)
•CallWaitTone = "1,30959,0,2392,0, 0, 1600, 4000,11200" (approximately -10 dBm)
•AlertTone = "1,30959,0,2392,0, 0, 480, 480,1920" (approximately -10 dBm)
Specific Call-Progress Tone Parameter Information
Brief descriptions, and lists of default values and the voice configuration menu code for each Cisco ATA
tone parameter, are described in the following sections:
•DialTone, page 5-43
•BusyTone, page 5-44
•ReorderTone, page 5-44
•RingbackTone, page 5-45
•CallWaitTone, page 5-45
•AlertTone, page 5-46

DialTone

Description
The Cisco ATA plays the dial tone when it is ready to accept the first digit of a remote address to make
an outgoing call.
Default values for the nine-integer array
•ntone—2
•freq0—31538
•freq1—30831
•level0—1380
•level1—1740
•steady—1
•on-time—0
•off-time—0
•total time to play tone—1000
Voice Configuration Menu Access Code
920