ConnectMode, Recommended Setting | Cisco Systems ATA 188 specs

Chapter 7 Configuring and Debugging Fax Services

Using Fax Pass-through Mode

ConnectMode

Description

The ConnectMode parameter is a 32-bit value. The parameter settings apply to both lines of the Cisco ATA. Configure ConnectMode after configuring AudioMode for fax pass-through mode. Cisco recommends you use the following ConnectMode setting to interoperate with a Cisco IOS gateway.

Recommended Setting

0x90000400

Translation

This setting translates to the bitmap:

1001 0000 0000 0000 0000 0100 0000 0000

Bit 2 and bits 7 through 15 are the only relevant bits for fax pass-through mode. These bits from the example are isolated below:

xxxx xxxx xxxx xxxx 0000 0100 0xxx x0xx

•Bit 2 = 0—Uses RTP payload number 126/127 for fax upspeed to G.711∝−law/G.711A-law. Set this value to 1 if you want to use RTP payload number 0/8 for fax upspeed.

•Bit 7 = 0—Disables fax pass-through redundancy. Set this bit to 1 to enable redundancy. With redundancy enabled, the Cisco ATA sends each packet twice. Because of bandwidth and transmission time costs, use this option only if network quality is poor and all other gateways used in the network support this feature.

•Bits {12, 11, 10, 9, 8} = {0, 0, 1, 0, 0}—Sets the offset to NSE payload-type number 96 to 4. Setting the offset to 4 results in the Cisco ATA sending an NSE payload-type value of 100 by default. Valid offset values range from 2 to 23 (NSE payload type value of 98 to 119). Set this value to match the value for your Cisco gateways.

Most Cisco MGCP-based gateways, such as Cisco 6608, use NSE payload type 101 by default. Most Cisco H.323/SIP-based gateways use NSE payload type 100 by default.

•Bit 13 = 0—Uses G.711∝−law for fax pass-through upspeed. Set this bit to 1 to use G.711A for fax pass-through upspeed.

•Bit 14 = Bit 15 = 0—Enables fax pass-through mode using the Cisco proprietary method (recommended). Set both of these bits to 1 to disable fax pass-through mode.

Configuring Cisco IOS Gateways to Enable Fax Pass-through

To configure your IOS gateways to network with Cisco ATA, do the following:

Procedure

Step 1 Enable Fax Pass-through Mode, page 7-4

Step 2 Disable Fax Relay Feature, page 7-5

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)

	OL-4008-01	7-3

ATA 188 specifications

The Cisco Systems ATA 188 is a versatile Analog Telephone Adapter designed to facilitate the integration of traditional telephone systems with Voice over Internet Protocol (VoIP) networks. This device has been key in bridging the gap between legacy telephony and modern IP-based communication, allowing users to leverage their existing analog phones while enjoying the benefits of digital connectivity.

One of the main features of the ATA 188 is its ability to connect regular analog phones to a VoIP network, enabling users to make and receive calls over the internet. This significantly reduces calling costs, especially for long-distance and international calls. The ATA 188 supports two phone lines, allowing simultaneous voice calls. This dual-line capability makes it a suitable choice for small businesses or home offices that require multiple lines without the need for extensive infrastructure.

The device is equipped with various technologies that enhance its functionality. It supports the Session Initiation Protocol (SIP) and H.323, making it compatible with a wide range of VoIP service providers. Additionally, the ATA 188 features Quality of Service (QoS) settings, which prioritize voice traffic over the internet, ensuring clear voice quality without interruptions or delays. This is essential for maintaining a professional communication experience, especially in business environments.

Another characteristic of the ATA 188 is its user-friendly configuration interface. It allows users to easily set up and manage their devices through a web-based portal. The configuration process is straightforward, with options to adjust settings such as codec selection, call features including call waiting, and call forwarding functionalities.

Security is also a priority for the ATA 188, as it provides robust protocols to protect call data. The device supports Secure Real-time Transport Protocol (SRTP) and Transport Layer Security (TLS) to encrypt voice traffic and manage signaling securely. This ensures that sensitive conversations remain confidential.

Overall, the Cisco Systems ATA 188 is a reliable and efficient solution for users looking to transition from traditional telephony to VoIP. Its dual-line capacity, compatibility with multiple VoIP standards, user-friendly configuration, and built-in security features make it a valuable asset for both personal and professional communication solutions. In an ever-evolving telecommunications landscape, the ATA 188 remains a relevant and practical choice for integrating legacy telephony with modern internet-based services.

Cisco Systems ATA 188 Configuring Cisco IOS Gateways to Enable Fax Pass-through, ConnectMode

Models: ATA 188