CHAPTER
5-1
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)
OL-4008-01
5
Parameters and DefaultsThis section provides information on the parameters and d efaults that you can use to create your own
Cisco ATA configuration file. This section also includes the voice configuration menu code for each
parameter that has such a code.
Some parameters on the Web Configuration screen are not used for H.323; only those used for H.323 are
covered in this section.
Parameters are divided into categories based on their functionality. The following categories of
parameters are covered in this section:
•User Interface (UI) Parameter, page 5-3
•Configuration-Complete Parameter, page 5-4
•Parameters for Configuration Method and Encryption, page 5-4
•Network Parameters, page 5-7
•Account Information Parameters, page 5-9
•Gatekeeper Parameters, page 5-15
•H.323 Mode Parameter, page 5-18
•Operating Parameters, page 5-18
•Optional Feature Parameters, page 5-35
The following list contains general configuration information:
•Your configuration file must begin with #txt.
•The Cisco ATA uses the following parameter types:
–
Alphanumeric string
–
Array of short integers
–
Boolean (1 or 0)
–
Bitmap value—unsigned hexadecimal integer (for specifying bits in a 32-bit integer)
–
Extended IP address—IP address followed by port number (for exampl e, 192.168.2.170.9001)
–
IP address (e.g. 192.168.2.170)
–
Integer (32-bit integer)
–
Numeric digit string