IBM SC30-3681-08 manual Addmac route-descriptor, Syntax Cong

Con®guring Forum LE Clients

Table 43. ATM LAN Emulation Client ARP Con®guration Commands Summary (continued)

Command	Function
Remove	Removes an ARP cache entry.
Exit	Returns you to the previous command level. See ªExiting a
	Lower Level Environmentº on page 11.

Add

Use the add command to add an ARP cache entry using the MAC address or a route descriptor.

MAC addresses, and route descriptors are entered as strings of hexadecimal characters with or without optional separator characters between bytes. Valid separator characters are dashes (±), periods (.), or colons (:).

Syntax:

addmac route-descriptor

Example 1:

ARP config for LEC>add mac

MAC address of LE ARP Entry []? 123456789098

ATM address in 00.00.00.00.00.00:... form []? 390f000000000000000000000000123456789098 Destination Type - REMOTE or LOCAL [Remote]?

Example 2:

ARP config for LEC>add route 12.34

ATM address in 00.00.00.00.00.00:... form []? 390f000000000000000000001234567890988888 ARP config for LEC>

Con®g

Use the Con®g command to con®gure the permanent ARP cache entry QoS parameters for the ATM forum-speci®c LAN Emulation Client.

Syntax:

con®g arp-entry-number

Example:

ARP config for LEC> config

ARP entry number [1]

Configure LEC ARP entry

Table 44. ATM LAN Emulation Client ARP Con®g Commands Summary

Command	Function
? (Help)	Displays all the commands available for this command level or
	lists the options for speci®c commands (if available). See
	ªGetting Helpº on page 10.
Set	Sets QoS parameter values.
Exit	Returns you to the previous command level. See ªExiting a
	Lower Level Environmentº on page 11.

Set:

Use the Set command to con®gure the permanent ARP cache entry QoS parameters for the ATM forum-speci®c LAN Emulation Client.

296MRS V3.2 Software User's Guide