IBM SC30-3681-08 manual Time Since Change, Local transmit encrypter, Remote receive encrypter

Monitoring PPP Interfaces (Talk 5)

PPPx>list control ecp

ECP State:	Open
Previous State:	Ack Sent
Time Since Change:	16 minutes and 40 seconds

Local (transmit) encrypter: DES

Remote (receive) encrypter: DES

De®nitions of Terms in the List Control ECP Example

ECP State:

The current state of the point-to-point link. If ªOpenº then encryption was successfully negotiated on this link. If not ªOpenº, encryption is not running on the link.

Previous State:

The state of the point-to-point link before the state displayed in the current state ®eld.

Time Since Change:

The elapsed time between the above two state changes.

Local (transmit) encrypter:

This encryption algorithm is used for encrypting the data being sent on this PPP interface.

Remote (receive) encrypter:

The encryption algorithm is used for decrypting the received data on this interface.

Example of the List Control LCP Command

Example:

list control lcp

Version:	1
	Link phase:	Establishing connection (LCP)
	LCP State:	Listen
	Previous State:	Req Sent
	Time Since Change:	1 minute and 57 seconds
	Remote Username:	- No Authentication -
	Last Identification Rx©d
	Time Connected:	- No Connection -
	LCP Option	Local	Remote
	----------	-----	------
	Max Receive Unit:	2048	1500
	Async Char Mask:	FFFFFFFF	FFFFFFFF
	Authentication:	None	None
	Magic Number:	7A8CBFD7	None
	Protocol Field Comp:	No	No
	Addr/Cntl Field Comp:	No	No
	32-Bit Checksum:	No	No

De®nitions of Terms in the List Control LCP Example

Version

Displays the current version of the Point-to-Point Protocol.

Link phase

Displays the current activity on the link. This can have one of the following values:

Dead There is no activity on the link; the interface is down.

Chapter 33. Con®guring and Monitoring Point-to-Point Protocol Interfaces 487