IBM SC30-3681-08 manual Crc

Con®guring V.34

initiates further calls. If you set this parameter to 0, the router waits for the modem to respond to the DTR drop by dropping CTS and DSR before it initiates the next call.

Statistics

Use the statistics command to display the current statistics for this V.34 interface.

Syntax: statistics

Example:

statistics
	V.34 port Statistics
Adapter cable:					RS-232 DTE		RISC Microcode Revision: 1
V.24	circuit: 105 106 107 108 109 125 141
Nicknames:		RTS	CTS	DSR DTR DCD RI			LL
RS-232		CA	CB	CC CD CF CE
State:		OFF OFF OFF OFF OFF OFF OFF
Line	speed:				115.200 Kbps
Last	port reset:				24 seconds	ago
Input frame errors:
CRC	error				0	alignment (byte length)		0
missed frame					0	too long (> 2182 bytes)		0
aborted frame					0	DMA/FIFO overrun		0
L &	F bits not set				0
Output	frame counters:
DMA/FIFO underrun errors					0	Output aborts sent		0

Adapter cable:

Type of adapter cable being used.

V.24 circuit:

Circuit numbers as identi®ed by V.24 speci®cations.

Nicknames:

Common names for the circuits.

RS-232

EIA 232 (also known as RS-232) names for the circuits.

State: Current state of the circuits: ON, OFF, or ²---,² which means that the state is unde®ned for this type of interface.

Line speed:

The transmit clock speed (approximate).

Last port reset:

Length of time since the port was reset.

Input frame errors:

CRC error

Number of packets received that contained checksum errors and as a result were discarded.

Alignment (byte length)

Number of packets received that were not an even multiple of 8 bits in length and as a result were discarded.

606MRS V3.2 Software User's Guide