IBM SC30-3681-08 Brly Considerations, When conguring BRLY, keep the following in mind, Remote

BRLY config>add		group
Local group number: [1]?
Point to Point connection?(Yes or [No]):
BRLY config>add		local
Local group number: [1]?
Interface number: [0]? 1
(P)rimary or (S)econdary: [S]? s
Station address		in hexadecimal (1 - FF): [1]? c1
BRLY config>add		remote
Local group number: [1]?
IP address of remote router: [0.0.0.0]? 6.6.6.4
Remote router group number: [1]?
(P)rimary or (S)econdary: [S]? p
BRLY config>li all
		BSC Relay Configuration
Local	Group		Port	Net	Remote	Station	IP
Group	Type	Status		Number	Group	Address	Address
------	-----	-----------------		------	------	-------	---------------
1 (E)	MULTI	Local	SCNDRY (E)	1		C1
		Remote	PRMRY (E)		1		6.6.6.4
E = enabled, D		= disabled

Figure 34. BRLY Con®guration for Router B (Commands entered at Router B)

BRLY config>add group Local group number: [1]? 2

Point to Point connection?(Yes or [No]): BRLY config>add local

Local group number: [1]? 2

Interface number: [0]? 1

(P)rimary or (S)econdary: [S]? s

Station address in hexadecimal (1 - FF): [1]? c5 BRLY config>add remote

Local group number: [1]? 2

IP address of remote router: [0.0.0.0]? 6.6.6.4

Remote router group number: [1]? 2

(P)rimary or (S)econdary: [S]? p BRLY config>li all

			BSC Relay Configuration
	Local	Group		Port	Net	Remote	Station	IP
	Group	Type	Status		Number	Group	Address	Address
------		-----	-----------------		------	------	-------	---------------
	2 (E)	MULTI	Local	SCNDRY (E)	1		C5
			Remote	PRMRY (E)		2		6.6.6.4
	E = enabled, D = disabled
Figure 35. BRLY Con®guration for Router C (Commands entered at Router C)
BRLY Considerations
				When con®guring BRLY, keep the following in mind:

564MRS V3.2 Software User's Guide