IBM SC30-3681-08 Syntax clear Link Station, Link name or address, Station name or address or all

Con®guring SDLC Interfaces

Syntax: clear	link
	station ...

link name or address

Clears the counters for an SDLC interface.

station name or address or all

Clears counters for a speci®c station or for all stations.

Delete

Use the delete command to terminate an existing SDLC connection without affecting the SDLC con®guration in SRAM. This command terminates any SDLC session that may be in progress on the link station. The router is considered the primary end station by default.

Syntax:

delete station name or address

Disable

Use the disable command to disable connection establishment on one or all SDLC link stations without affecting the SDLC con®guration in SRAM. Thedisable command also terminates any existing connection to the station.

Syntax: disable link

station . . .

link Prevents connection on all con®gured SDLC link stations on the interface by terminating all connections.

station name or address

Prevents connection to the speci®ed end station (link station name) by terminating any existing connection.

Enable

Use the enable command to enable connection establishment with remote SDLC link stations without affecting the SDLC con®guration SRAM.

Syntax:
enable	link
	station . . .

link Allows subsystems (for example, DLSw) to use SDLC's facilities.

station name or address

Allows connections to the speci®ed end station.

List

Use the list command to display statistics speci®c to the data link layer and the interface.

Syntax:

Chapter 38. Con®guring and Monitoring SDLC Interfaces 551