IBM SC30-3681-08 manual Token-Ring Interfaces and the Gwcon Interface Command, Self-Test Pass

Con®guring Token-Ring Network Interfaces

LLC

Use the LLC command to access the LLC monitoring prompt. LLC commands are entered at this new prompt. See ªLLC Monitoring Commandsº on page 239 for an explanation of each of these commands.

Syntax:

llc

Token-Ring Interfaces and the GWCON Interface Command

While Token-Ring interfaces have their own monitoring processes for monitoring purposes, the router also displays complete statistics for installed network interfaces when you use the interface command from the GWCON environment.

Statistics Displayed for 802.5 Token-Ring Interfaces

The following statistics display when you enter the interface <net#> command for a Token-Ring interface from the GWCON environment.

Nt	Nt©	Interface		CSR	Vec	Passed	Failed	Failed
0	0	TKR/0	6000000		1C	1	0	0
Token-Ring/802.5			MAC/data-link on IBM Token-Ring interface
Microcode version: 000VL00A0 (050394)
Physical address				000C90820C7
Network speed				16 Mbps
Max packet size (INFO)				2052
Handler state				Ring open
Ring status				SERR CO
Interface Restarts				0
# times Signal lost				0		# times Beaconing		0
Hard errors				0		Lobe wire faults		0
Auto-removal errors				0		Removes received		0
Ring recovery actions				0
Line errors				0		Burst errors		0
ARI/FCI errors				0		Inputs dropped		0
Frame copy errors				0		Token errors		0
Lost frames				0

The following section describes general interface statistics:

Nt Global interface number

Nt' Applies only to dial circuits

Interface

Interface name and Number of this interface within interfaces of type ªintrfcº

CSR COMM and Status Registers address

Vec Interrupt vector

Self-Test: Pass

Number of times self-test succeeded

Self-Test: Fail

Number of times self-test failed

230MRS V3.2 Software User's Guide