Cisco Systems 4039760, EPC3827, DPC3827 important safety instructions Status DOCSIS Signal

	Monitor Gateway Status
Section	Field Description
	Current Software Revision
	Displays the revision version of the firmware.
	Firmware Name
	Displays the name of the firmware.
	Firmware Build Time
	Displays the date and time the firmware was built.
	Cable Modem Status
	Displays one of the possible current states of the gateway.
Downstream	Channels 1-8
Channels	Displays the power level and the signal to noise ratio of the active
	downstream channels.
Upstream	Channels 1-4
Channels	Displays the power level of the active upstream channels.

Status > DOCSIS Signal

Important: This page is only visible until the gateway goes online. After the gateway is online and registered on the network, this page is no longer visible.

Important: Once the gateway is online, the remaining status can only be accessed by an authorized service technician.

The DOCSIS Signal Status page displays a detailed status report of the DOCSIS signal for each of the downstream and upstream channels.

The downstream channels section reports the status of the following items:

Channel ID

Downstream Frequency

Modulation

Power Level

Signal-to-Noise Ratio

The upstream channels section reports the status of the following items:

Channel ID

Upstream Frequency

Modulation

Bit Rate

4025083 Rev A 71