Cisco Systems 4039760, EPC3827, DPC3827 Security VPN Passthrough, Disable Pptp Passthrough

How Do I Configure My DOCSIS Residential Gateway?

Security > VPN Passthrough

Use this page to configure Virtual Private Network (VPN) support. Enabling the settings on this page allows VPN tunnels using IPsec or PPTP protocols to pass through the gateway's firewall. Select the VPN Passthrough tab to open the Security VPN Passthrough page.

Use the descriptions and instructions in the following table to configure the VPN passthrough for your residential gateway. After you make your selections, click Save Settings to apply your changes or Cancel Changes to cancel.

Section	Field Description
VPN Passthrough	IPSec Passthrough
	Enables/disables Internet Protocol Security (IPsec). IPsec is a
	suite of protocols used to implement secure exchange of
	packets at the IP layer. If you enable IPSec Passthrough,
	applications that use IPsec (IP Security) can pass through the
	firewall. To disable IPSec Passthrough, select Disable.
	Select the desired option:





Enable (factory default)

Disable

PPTP Passthrough

Enables/disables Point-to-Point Tunneling Protocol (PPTP). PPTP allows the Point-to-Point Protocol (PPP) to be tunneled through an IP network. If you enable PPTP passthrough, applications that use PPTP can pass through the firewall. To disable PPTP passthrough, select Disable.

Select the desired option:





Enable (factory default)

Disable

38 4025083 Rev A