Configure Wireless Settings
Wireless Network Name (SSID)
The SSID is the name of your wireless network. The SSID is used by wireless technology to identify your network from other wireless networks in the area. The SSID can be up to 32 characters long. The factory default SSID is typically the last 6 characters of the CM MAC address found on the rating label located on the bottom of your gateway.
This SSID is a unique identity and does not need to be changed unless you choose to do so. Your service provider may provide you with wireless setup information that may call for a different SSID.
BSSID
Displays the Basic Service Set Identifier (BSSID) of your wireless network. The BSSID is typically the MAC Address of the wireless access point.
Note: This may not be the same MAC Address as the CM MAC Address used to determine the factory default SSID.
Broadcast SSID
When this box is checked (factory default), the gateway transmits or advertises its presence to other wireless devices. Client devices can automatically detect the access point when this beacon is enabled.
Uncheck this box if you want to hide your network from wireless clients. If you hide your network, you will need to configure each of your wireless client devices manually.
Important: The Enable check box is not currently in use and does not impact operation of the gateway.
Wireless > Wireless Security
Selecting a wireless security mode helps protect your network. If you select Disable, then your wireless network is not secure and any wireless device within range may connect to it.
To keep intruders out of your wireless network, use the Wireless Security page to configure your security parameters including SSID, the security mode, and your encryption keys.
Select the Wireless Security tab to open the Wireless Security page. The following illustrations show examples of the Wireless Security page.
Wireless Security Page Description
Use the following table to configure the wireless security for the residential gateway. After you make your selections, click Save Settings to apply your changes or Cancel Changes to cancel.
4025083 Rev A | 83 |
